Great Plains FH6800HD Predelivery Manual - Manual (Page 28)

24 FH6000HD Great Plains Manufacturing, Inc.
564-070Q 01/14/2014
8 Bar Drag
Refer to Figure 24
Note: 8 bar drag attaches same way as the front 8 rows of
12 bar drag, except when attaching the rear chain
if not already assembled on lower spike tooth
bracket , be sure and use bolt instead of
.
802-082C HHCS 1/2-13X1 3/4 GR5
802-128C HHCS 1/2-13X2 GR5
12 Bar Drag
Refer to Figure 24
67. Lower the arms.
68. Remove fasteners from free ends of trailing
chains :
802-024C HHCS 3/8-16X3 GR5
803-013C NUT LOCK 3/8-16 PLT
Secure free ends of chains to arm with bolts
and lock nuts . Tighten nuts only to Grade 2
torque specification.
69. Repeat step 63 through step 71 for the other center
drag.
16 Bar Drag
Refer to Figure 25
Note: The 16 -row option will be shipped with the two 4-bar
sections (8-bar) attached, on pallet and they will
need fasten together with the rear link of rear pull
chain and bolts as shown below.
70. Lower the arms.
71. Remove fasteners from free ends of trailing
chains :
802-024C HHCS 3/8-16X3 GR5
803-013C NUT LOCK 3/8-16 PLT
Secure free ends of chains to arm with bolts
and lock nuts . Tighten nuts only to Grade 2 torque
specification.
72. Repeat step 70 through step 71 for the other center
drag and wings.
29
130 100
99
100
99
Figure 24: Center:
Attach Trailing Chain (12 Bar)
31648
53
5
39
29
130
99
29
39
53
29 39
53
Figure 25: Center:
Attach Trailing Chain (16 Bar)
31648
53 5
39
29
29
39
53
29 39
53