Orifice plate selection, Row shutoff – Great Plains 1625AHL Material Rate User Manual

Page 97

Advertising
background image

Great Plains Manufacturing, Inc.

Table of Contents

Liquid Fertilizer Rates

93

2014-03-17

Table of Contents

411-020B

Orifice Plate Selection

Skip this step if using VeriFlow nozzles.

Refer to Figure 23

Agricultural Chemical Hazard:
Wear protective gloves when changing orifice plates.

In general, the orifice

needs to be small enough to

create at least 15 psi of pressure in the manifold but
large enough to prevent the manifold pressure from
exceeding 65 psi.

The minimum pressure is required to even out the flow of
fertilizer between rows. To reduce orifice plugging and
pump wear, use the largest orifice practical for your
fertilizer application rate.

The best pressure range to maintain is 15-to-40 psi to
ensure optimum distribution while minimizing leakage.

Orifice Size Does Not Control Rate:
Orifice size is only used to create 15-to-65 psi back pressure to
provide even flow between rows. Set application rate in gallons
per acre using pump drive chart.

Row Shutoff

Unused drop lines may be shut off by replacing the
nozzle

with a Great Plains 832-051C cap

.

Nutri-Pro

®

boom systems typically have more nozzles

than coulters, and include caps for unused rows.

When installing a cap:

• It is not necessary to remove the gasketed orifice plate

from inside the clamp. The cap includes its own gasket
that seals at the end of the clamp port.

• Use a tie wrap or other line to secure the loose nozzle

and drop line tubing to the boom.

• Adjust pump and/or orifice plates for new rate and row

spacing.

Mis-Application or Material Loss Risk:
Do not apply materials after row shut-off or row turn-on
without first reviewing setup. Merely changing the number of
active rows does not change the application rate. If pump
and/or orifice size changes are not also made, pressures could
be too low or too high.

Figure 23

Fertilizer Orifice Plate

29984

1

3

2

1

Orifice

Part

Port

Port

Size

Number

Diameter

Area

20

832-052C

0.020 in

0.20 mm²

28*

832-056C

0.028 in

0.40 mm²

34*

832-053C

0.034 in

0.59 mm²

48*

832-054C

0.048 in

1.17 mm²

59 832-057C

0.059

in

1.76 mm²

80

832-055C

0.080 in

3.24 mm²

98

832-059C

0.098 in

4.87 mm²

29993

* Sizes standard in many fertilizer bundles.
Check your accessories before ordering.

2

3

Advertising
This manual is related to the following products: