Great Plains NTA2000D Operator Manual User Manual
Page 52
Advertising
Multi-function Drill Control
38l
10 Bout Tramlining Sequence
This tramlining mode requires Great Plains P/N 890-785C NTA2000 dual tramline controls kit.
For use with 20ft (6 meter) drill and a 50 ft (15 meter) sprayer combinations. (Two left hand seed spouts are
closed on bouts 4 and 7, and two right hand seed spouts closed on bouts 2 and 9). Starting on bout 1 requires
turning RIGHT at the end of the first bout.
NOTE: To turn LEFT at the end of the first bout, advance the bout number to 6 before commencing drilling.
The instrument will beep once at the beginning of each tramline bout and the display will flash for the duration
of the tramline bout.
Advertising