Great Plains NTA2000D Operator Manual - Manual (Page 73)

53 9/13/2006 NTA 2000D 148-632M
Great Plains Mfg., Inc.
Soy Beans
Variator Range: High 2800 seeds/lb
Recommended Fan Speed: 2750-3500 RPM
Flap Position
3
Recommended
4 5
Variator Setting lbs/Acre lbs/Acre lbs/Acre
2 0 0 2.0
4 5.5 7.0 12.0
6 13.7 16.3 21.6
8 21.7 25.4 30.9
10 29.4 34.1 39.9
12 37.0 42.5 48.7
14 44.3 50.7 57.1
16 51.4 58.7 65.3
18 58.3 66.4 73.3
20 65.1 73.9 81.1
22 71.8 81.3 88.7
24 78.4 88.5 96.2
26 84.8 95.6 103.5
28 91.2 102.6 110.8
30 97.5 109.5 117.9
32 103.8 116.3 125.0
34 110.1 123.1 132.0
36 116.3 129.8 139.0
38 122.6 136.6 146.1
40 128.9 143.3 153.1
42 135.2 150.1 160.2
44 141.6 157.0 167.3
46 148.2 163.9 174.6
48 154.8 171.0 181.9
50 161.5 178.1 189.4
52 168.4 185.4 197.1
54 175.4 192.9 204.9
56 182.7 200.6 212.9
58 190.1 208.5 221.2
60 197.7 216.6 229.7
62 205.6 224.9 238.4
64 213.7 233.5 247.5
66 222.1 242.4 256.8
68 230.8 251.7 266.5
70 239.8 261.2 276.5
72 249.2 271.2 287.0
74 258.8 281.4 297.8
76 268.9 292.1 309.0
78 279.3 303.3 320.7
80 290.1 314.8 332.9
82 301.3 326.8 345.5
84 313.0 339.3 358.6
86 325.1 352.3 372.3
88 337.8 365.9 386.5
90 350.9 379.9 401.3
Wheat
Variator Range: High 64 lbs/bu
Recommended Fan Speed: 2800-3200 RPM
Flap Position
2
Recommended
3
Variator Setting lbs/Acre lbs/Acre
2 2.0 0
4 8.6 5.9
6 15.1 13.6
8 21.5 21.1
10 27.8 28.4
12 34.0 35.5
14 40.2 42.5
16 46.3 49.2
18 52.4 55.9
20 58.5 62.4
22 64.5 68.8
24 70.5 75.2
26 76.5 81.4
28 82.5 87.6
30 88.5 93.8
32 94.6 100.0
34 100.7 106.2
36 106.8 112.3
38 113.0 118.6
40 119.2 124.8
42 125.5 131.2
44 131.9 137.9
46 138.4 144.2
48 145.1 150.8
50 151.8 157.6
52 158.6 164.6
54 165.6 171.7
56 172.7 179.0
58 180.0 186.6
60 187.4 194.3
62 195.0 202.3
64 202.8 210.6
66 210.8 219.1
68 219.0 227.9
70 227.4 237.1
72 236.0 246.5
74 244.8 256.4
76 253.9 266.5
78 263.3 277.1
80 272.9 288.1
82 282.8 299.4
84 292.9 311.3
86 303.4 323.5
88 314.1 336.2
90 325.2 349.5
Note: These charts are relating to “standard” seed size and shape. Some seeds, such as peas and beans, tend to vary
in size that it is recommended to make calibration tests with care to adjust the required seed rate. Flap position must
be adjusted depending on size and shape.
Note: For variator settings of 0-60 the recommended drill speed is 8-9 mph. For variator settings 60-90 the recommend-
ed drill speed is 5-6 mph.
7 1/2in (19.05cm) Spacing