Bio-Rad Components for Older Model Spot Cutter User Manual
Page 21
This will produce an information box. Press the Yes button to move the cutting head to the
parking position and turn lights on if you wish to take a picture. Alternatively, select "No" and
use the pulse button on the front of the system to turn lights on. Next, another information box
will appear, press the OK button to continue. You should now be in the Photo Enhancer
program.
Select this menu, or pressing the Print shortcut key located below the menu bar to print
an image file. The image must have a project number to be printed. If it does not, upon selecting
the Print menu an information box will appear stating "No project number, do you want to
enter new number?" Press Yes and enter a project number to proceed with printing.
Note: A Gel number is not needed to print.
The Name field of the Printer panel enables you to select a printer if more than one printer
is connected to your computer.
Selecting the Size list box of the Paper panel displays a drop down list from which you
can select the paper size to be used.
Selecting the Source list box of the Paper panel displays a drop down list from which
you can select either manual or auto sheet feed.
The Orientation panel allows you to select either Portrait or Landscape page orientation.
Once the above settings are completed, press OK. This will display the Print Selection
window.
This contains a number of options for printing:
(a) The Original Picture selection will print the picture as it was when the image
was last opened using Open Image file, i.e. no matter how many changes (new
spots) have been made, the original opened image will be printed.
(b) The Amended Picture selection prints the original image plus any amendments
made to it since the picture file has been opened. It will print all spots cut and
all spots selected, but not yet cut.
(c) By selecting the With Spots List check box, the Digital Camera x-y coordinates
for each spot are also given.
Once selections have been made, select the OK button to print picture, or Cancel if you
no longer wish to print.
Exit
Select the Exit menu to leave the SpotOn System program.
7.2 View Menu
Selecting the View menu will produce the following drop down menu.
17