Bio-Rad Model 550, Ultramark, and Benchmark Microplate Reader Accessories - Manual (Page 30)

c. Press ENTER and the screen will change
d. Use either ARROW to move the cursor under the check box next to Print Reports.
e. Press SELECT to darken the check box.
f. Press ENTER and the printer will begin printing. When printing is completed the
screen returns to
2. Printing the system configuration.
a. Press MODE until the display shows
b. Press ENTER and the display changes to
c. Use either ARROW to move the cursor under the check box next to System Config.
d. Press SELECT to darken the check box.
e. Press ENTER and the display will change to
f. Use either ARROW to move the cursor under the check boxes next to the desired
reports.
g. Press SELECT to darken the check box. More than one check box may be darkened
to get more than one report.
h. When all desired reports have been selected, press ENTER. The reports will be
printed immediately. When printing is finished, the screen returns to
27
>PRINT REPORT
MODE
>PRINT REPORT
MODE
■ ■ Print Reports
■ ■ System Config.
■ ■ Ana ■ ■ Repo ■ ■ Blnk
■ ■ Limt ■ ■ Cut ■ ■ Conc
>PRINT REPORT
MODE
■ ■ Print Reports
■ ■ System Config.