Bio-Rad ZOE™ Fluorescent Cell Imager - Manual (Page 24)

16 | ZOE Fluorescent Cell Imager Instruction Manual 16 |
Tapping an active channel (image is displayed) hides the particular color from display, tapping it
again makes it visible again.
Edit — tap the color for which you wish to adjust brightness and contrast. Drag the slider bar or
tap the + and – controls for fine adjustments (Figure 15).
Note: Brightfield images cannot be edited in Merge mode. Any edits to a brightfield image
must be made in Gallery mode and saved. Edits made and saved in Gallery mode to an image
selected in Merge mode will also display in Merge.
Save — when satisfied with the multicolor image tap the Save icon (Figure 13). The merged
image, along with links to the underlying single-color images, is saved to the Merge folder in the
Gallery (Figure 10).
Note: When creating a merge, only color channels that are active at the time of saving
(Figure 14A) are included. If a color is inactive and thus not displayed (Figure 14B), it will not
be included.
Clear — use to clear all selections (Figure 13). This control is also available in Gallery mode.
Note: To empty a single channel, go to the individual image folder in the Gallery and tap the
active Select icon (Figure 11). The icon will go to its off state and the particular color channel in
Merge mode will be empty (Figure 14C). To replace an image, return to Gallery mode and tap
the Select icon in the image you wish to use instead.
Note: When the stage is centered, a different field of view is displayed. To prevent users from
accidentally merging images with different fields of view, all image selections for merge are
cleared when the stage is centered.
Fig. 15. Edit dialog window in Merge mode.
Brightness: 0
Apply Cancel
Contrast: 0