Bio-Rad Model 2110 Fraction Collector - Manual (Page 11)

4.2 Front Panel Functions
Fig. 4.2. Front panel controls.
Feature Function
Run/Stop key The Run/Stop key is used to select
standby or active mode. In the active
mode, the collector will collect by
time or drops, or accept an external
signal. When the collector is con-
trolled by a system, both the standby
and active mode lights will be lit,
and the LED display will read “---”.
Time/Drop key The Time/Drop key is used to select
collection by time or by drops.
Arrow keys The Arrow keys are used for
increasing or decreasing the length
of time for collection in each tube,
or changing the number of drops to
be collected in each tube.
LED multi This three-digit display will show
display decimal minutes or drop count that
has progressed for the tube currently
collecting. When the collector is con-
trolled by a system, both the standby
and active mode lights will be lit, and
the LED display will read “---”.
Advance key Pressing the advance key will
advance the carousel one position.
ml
min
ml/min
%
MODEL 2110 FRACTION COLLECTOR
7
M7318120G.qxd 10/21/2002 2:48 PM Page 7