Bio-Rad Model 2110 Fraction Collector - Manual (Page 8)

4. Reinsert the fuse drawer in the power entry module, with the locking
tab to the left. The voltage indicator will read right-side-up if the
drawer is oriented correctly. Push the fuse drawer in gently until it
snaps into place.
5. Connect the power cord to the power entry module and power mains.
6. There is no power switch on the fraction collector. When connected
to an AC power source, the Model 2110 Fraction Collector will come
on in the Stop or Set mode.
Fig. 3.1. Voltage conversion.
4
Fuse drawer (110 V configuration)
Fuse drawer (220 V configuration)
M7318120G.qxd 10/21/2002 2:48 PM Page 4