Bio-Rad Model 2110 Fraction Collector - Manual (Page 6)

Section 2
Introduction
Fig. 2.1. Model 2110 Fraction Collector.
The Model 2110 Fraction Collector (Figure 2.1), shown with the
optional instrument dust cover, is designed to be used with gravity feed
columns, preparative electrophoresis and liquid chromatography systems.
The Model 2110 Fraction Collector will accurately collect up to 80
fractions, at a flow rate of up to 40 ml/min. The Model 2110 Fraction
Collector accepts standard 13 x 100 mm test tubes or, with an optional
adaptor, 1.5 ml micro test tubes. Tubes are advanced by a motor-driven
2 2
M7318120G.qxd 10/21/2002 2:47 PM Page 2