Bio-Rad Bio-Scale™ Mini Macro-Prep® High Q and Macro-Prep High S Cartridges - Manual (Page 15)

Fig. 4. Luer to 1/4-28 adaptor.
3.2 HPLC Systems
The luer to 10-32 adaptor fittings kit (catalog
#732-0112) provides fittings necessary to connect
the Bio-Scale Mini cartridge to nut and ferrule type
fittings found on most HPLC systems. Alternatively,
the cartridge can be connected to HPLC systems
via a low dead-volume 1/16 inch union with a new
piece of stainless-steel tubing attached to the
union. Simply slip a short length of the 0.8 mm ID
tubing over the 1/16 inch OD stainless-steel tubing
to a distance of 1 cm.
11
10006400B.qxp 7/10/2006 3:48 PM Page 11