Dell 2335DN - Manual (Page 131)

Option Description
Email
Alert Setup
IP
Address or
Host Name
Sets the IP address or Host name.
Primary
SMTP Gateway
Sets the primary SMTP gateway.
Enable
Primary SMTP
Auth
Specifies the authentication method for outgoing
e-mail.
Primary
SMTP Account
Name
Specifies the SMTP login user. Up to 63
alphanumeric characters, periods, hyphens, under bars,
and at symbols (@) can be used. If specifying more
than one address, separate them using commas.
Primary
SMTP Account
Password
Specifies the SMTP account password up to 31
alphanumeric characters.
Primary
From
Sender's e-mail address registered in the Primary
server.
SMTP
Timeout
Sets the timeout period from 30 to 120 seconds.
Reply
Address
Designates the reply e-mail address sent with
each E-mail Alert.
Email
Alert Setup
Email List
1 ~ 2
Sets acceptable e-mail addresses for the E-Mail
Alert feature up to 255 alphanumeric characters.
Select
Alerts for List 1
Supply Alert : Select the check box to
receive an E-Mail Alert for consumables.
Paper Handling Alert : Select the check
box to receive an E-Mail Alert for paper handling.
Select
Alerts for List 2
Supply Alert : Select the check box to
receive an E-Mail Alert for consumables.
Paper Handling Alert : Select the check
box to receive an E-Mail Alert for paper handling.
Scanning and Sending an Email
Ensure that your printer is connected to a network. 1.
Load the document(s) face up with top edge in first into the DADF. 2.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document" .
Press Scroll ( or ) to highlight Scan and then press Select ( ). 3.
4.