Dell 2335DN - Manual (Page 73)

This setting is used to determine whether the printer can substitute with another paper size when the
requested paper size is not available in any of the input trays. The Printer will substitute A4/Letter,
A5/Statement, B5/ISO B5, and Folio/Oficio. For example if A4 is requested paper size and there is no A4
paper in any of the input source then the printer will print on Letter size paper, if available.
Substitute size set to Off means no substitution is allowed for the requested paper size. This option is not
applied for received fax printing.
NOTE: You can use this feature in print and copy job.
MPF
MPF can be configured to behave in Tray Mode or in Bypass Mode by setting the Configure MPF menu in
the operator panel.
Bypass Mode
In this mode the printer pulls the paper from MPF first unless it is closed or empty. MPF gets the highest
priority and pulls whatever media present in the MPF.
NOTE: You can use this feature in print and copy job.
Tray Mode
In this mode the MPF is treated as another paper tray. Instead of treating MPF as first preference paper
source, printer pulls paper from the tray that matches the size and type. The first preference goes to the
default source.
NOTE: You can use this feature in print, copy, and fax job.
Setting the Paper Margin
You can set the paper margin for simplex or duplex printing.
Press Scroll ( or ) to highlight Setup and then press Select ( ). 1.
Press Scroll ( or ) to highlight Paper Setup and then press Select ( ). 2.
Press Scroll( or ) to highlight Margin and then press Select ( ). 3.
Press Scroll( or ) to select Common Margin, specific paper tray you want to use, or PCL Margin
Shift and then press Select ( ).
4.
5.
6.