Canon Pixma MP530 - Manual (Page 23)

Chapter 1 21 Before Printing
z Using the ADF
1
Remove any documents from the Platen Glass.
2
Open the Document Tray.
3
Load the document in the ADF (1).
Load the document with the side you want to copy, fax, or scan face up in the ADF.
4
Adjust the Document Guides to match the document width (2).
Note
z Set a document on the Platen Glass if you want to scan it at optimum quality.
z The area (range) within 0.08” / 2 mm from the top edge of document cannot be printed
since the machine cannot scan it.
z Do not load the following types of documents in the ADF. They will jam.
– Wrinkled or creased paper
– Curled paper
– Torn paper
– Paper with holes
– Carbon paper or carbon-backed paper
– Surface treated paper
– Onion skin or thin paper
– Photograph or thick paper
(2)
(1)
(A)