Canon Pixma MP530 - Manual (Page 59)

Chapter 3 57 Printing Photographs Directly from a Compliant Device
*1 This paper is exclusively used to print photo stickers. When printing on sticker paper, select 4"
x 6" / 10 x 15 cm in “Paper size”.
*2 This size can be selected only for Canon PictBridge compatible devices (note that it cannot be
selected for some models).
*3 “Plain Paper” can be selected for “Paper type” when A4 or 8.5" x 11" (Letter) is selected for
“Paper size”. When “Plain Paper” is selected for “Paper type”, bordered printing will be
performed even when “Borderless” is selected for “Layout”.
*4 When A4 or 8.5" x 11" (Letter) is selected for "Paper size", you can print in 4-up layout.
„ About “Layout” and “Trimming”
For "Layout", when the “Default” (selections based on the machine setting) is selected, the
machine operates based on the <PICTBRIDGE SET> in [Menu] of the machine. Trimming is
performed based on settings on the PictBridge compliant device.
„ About “Image optimize”
When the “Default” (selection based on the machine setting) is selected, the machine operates
based on <PICTBRIDGE SET> in [Menu] of this machine.
If you use a Canon PictBridge compatible device, you can select “VIVID”, “NR”, “VIVID+NR” or
“Face” (Note that these options cannot be selected for some models).
A4 / 8.5" x 11" (Letter) *3, *4 Photo Photo Paper Plus Glossy
Photo Paper Plus Semi-gloss
Glossy Photo Paper
Fast Photo Photo Paper Pro
A4 *3, *4 Photo Glossy Photo Paper "Everyday
Use"
5.4 x 8.6 cm / Credit Card Photo Glossy Photo Paper
Note
z When printing onto Photo Stickers (PS-101) (16-up), use the following settings.
1. Select the Auto Sheet Feeder as the paper source.
For details, see “Loading the Print Media in the Auto Sheet Feeder” on page 27 .
Always load Photo Stickers (PS-101) in the Auto Sheet Feeder.
2. Select 4" x 6" / 10 x 15 cm for the “Paper size”, and “Photo” for the “Paper type”.
3. Select N-up for layout, then select 16-up.
z Some PictBridge compliant devices display the Layout option; 2-up, 4-up, 9-up, and 16-up.
In this case always select 16-up. If there are no options on the PictBridge compliant device
that correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is not possible.
z When you using Photo Stickers (PS-101), do not set “Borderless” in “Layout” settings.
Note
z When “VIVID” is selected, green and blue portions of photos are printed vividly.
z When “NR” (Noise Reduction) is selected, noise in blue portions, such as the sky, and dark
portions is removed.
z When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are performed.
z When “Face” is selected, backlit images are corrected when printed.
“Paper size” setting “Paper type” setting Paper loaded in machine