Canon Pixma MP530 User Manual
Page 77
Chapter 4
75
Faxing
1
Connect a telephone to your machine if you want to talk to the recipient before
sending a document.
2
Load the document in the ADF.
3
Press [FAX].
4
Adjust the settings for your document as necessary.
5
You can lift the handset if an answering machine is connected to the machine.
6
Dial the recipient’s number using the numeric buttons or coded speed dialing.
7
Talk through the handset to the recipient.
If you hear a high-pitched signal instead of the recipient’s voice, go to step 9.
8
Ask the recipient to set recipient’s fax machine to receive faxes.
9
When you hear a high-pitched signal, press [Color] for color sending, or [Black] for
black & white sending. Then hang up the handset.
z
Sending Faxes from Your Computer
With your machine connected to your computer, you can send faxes from the computer. For
details, refer to the FAX Driver Guide.
How to Use Coded Speed Dialing
Pre-registering fax numbers in coded speed dials enables you to dial them by just pressing
[Coded Dial] and entering a two-digit code.
1
Press [Coded Dial].
Note
For details on how to load documents, see
“Loading Documents” on page 19
.
Note
z
To select the image quality (fax resolution), see
“Adjusting the Image Quality (Fax
z
To select the scan contrast, see
“Adjusting the Scan Contrast” on page 73
.
Note
For details on how to use coded speed dialing, see
“How to Use Coded Speed Dialing” on
page 75
.
Important
Color sending is available only when the recipient’s fax machine supports color faxing.
Note
To cancel manual sending, press [Stop/Reset].