Canon Pixma MP530 - Manual (Page 96)

94 Chapter 7 Changing the Machine Settings
Enables/disables the summer time setting. If you select <ON>, you can select additional
sub-settings (This setting is not available in some countries and regions).
z UNIT TEL NUMBER
Enters the fax/telephone number printed on faxes you send.
z UNIT NAME
Enters the name printed on faxes you send.
z TX TERMINAL ID
Prints sender information at the top of each fax you send (The ON/OFF setting may be
available depending on the county of purchase).
z OFFHOOK ALARM
Enables/disables the alarm that alerts you if the handset of the telephone connected to the
machine is not hung up properly.
z VOLUME CONTROL
Sets the RX RING VOLUME and LINE MONITOR VOL.
z RX RING LEVEL
Selects the ring type for incoming call.
z TEL LINE TYPE
Selects the telephone line type setting for your machine.
z ACTIVITY REPORT
Sets whether to print the ACTIVITY REPORT automatically after every 20 transactions.
„ TX SETTINGS
z ECM TX
START DATE/TIME: Sets the date and time that summer time starts.
SET MONTH
SET WEEK
SET DAY OF WEEK
SET SHIFT TIME
Specify the month.
Specify the week.
Specify the day of the week.
Specify the 24 hours.
END DATE/TIME: Sets the date and time that summer time ends.
SET MONTH
SET WEEK
SET DAY OF WEEK
SET SHIFT TIME
Specify the month.
Specify the week.
Specify the day of the week.
Specify the 24 hours.
TTI POSITION: Selects the position of the sender information (outside or inside
the image area) when sending black & white faxes
(Automatically set inside the image area for color faxes).
FAX/TEL NO. MARK: Selects the mark to appear before the fax/telephone number
printed on faxes you send.
RX RING VOLUME: When the machine is set to ring, selects the ring volume.
LINE MONITOR VOL.: Selects the line monitor volume while dialing.
Note
In New Zealand, select <TOUCH TONE>. You cannot use <ROTARY PULSE>.