Canon Pixma MP530 - Manual (Page 97)

Chapter 7 95 Changing the Machine Settings
Enables/disables Error Correction Mode (ECM) sending.
z PAUSE TIME
Selects the pause length when you press [Redial/Pause].
z AUTO REDIAL
Enables/disables automatic redialing.
z TX START SPEED
Selects the speed at which the machine starts transmitting.
z COLOR TX
When faxing in color from the ADF, enables/disables automatic converting the image into
black and white before sending if the destination fax device does not support color.
z TX REPORT
Enables/disables automatic printing of a transmission report after sending.
z DIAL TONE DETECT
If you selects <ON>, the machine transmits after confirming the dial tone. This function
may not be supported depending on your country or area.
„ RX SETTINGS
z ECM RX
Enables/disables Error Correction Mode (ECM) during reception.
z FAX/TEL AUTO SW
If you select <FAX/TEL AUTO SW> as the receive mode, customizes its settings.
z DRPD:FAX RNG PAT
If you select <DRPD> as the receive mode, select the ring pattern for the machine. This
setting is only available in US and Canada.
z INCOMING RING
If you select <FAX/TEL AUTO SW>, <DRPD> or <FAX ONLY MODE> as the receive
mode, enables/disables ringing for fax calls (A telephone must be connected to your
machine for ringing to occur).
REDIAL TIMES: If you select <ON> as <AUTO REDIAL>, enables setting the
number of redialings.
REDIAL INTERVAL: If you select <ON> as <AUTO REDIAL>, enables setting the
length of time between redialings.
ATTACH TX IMAGE: If you select <PRINT ERROR ONLY> or <PRNT FOR EACH
TX> as <TX REPORT>, enables/disables printing the first page
of the fax under the report (black & white faxes only).
RING START TIME: Selects the time the machine takes to check whether a call is a
fax or voice call.
TEL RING TIME: Selects the ring length for voice calls.
DEFAULT ACTION: Selects whether the machine switches to receive mode after
the ring time has elapsed, or whether it disconnects the call.
RING COUNT: If you select <ON> as <INCOMING RING>, selects the number
of rings for fax calls.