Canon Pixma MP530 - Manual (Page 49)

Chapter 2 47 Copying
1
Display the Special copy screen.
See “Special Copy” on page 45 .
2
Load the document on the Platen Glass or in the ADF.
3
Use [ ] or [ ] to select <4-ON-1>, then press [OK].
4
Use [ ] or [ ] to specify the layout pattern.
PATTERN 1 / PATTERN 2 / PATTERN 3 / PATTERN 4
5
Specify the page size and media type.
See “Changing the Page Size and Media Type” on page 37 .
6
Specify the necessary items.
See “Changing the Copy Settings” on page 41 .
7
Press [Color] for color copying, or [Black] for black & white copying.
z When the document was loaded on the Platen Glass:
When the first to third sheet of document finishes to be scanned, the message below is
displayed.
If you have another sheet of document to scan, load it on the Platen Glass and press
[Start].
If you do not need more scanning, press [OK].
z When the document was loaded in the ADF:
The machine starts scanning in the next sheet of document automatically after one sheet of
document is scanned in.
„ Creating Stickers (Sticker copy)
You can easily make stickers from 4" x 6" / 101.6 x 152.4 mm photos or graphics using Canon
Photo Stickers.
Note
You cannot specify <ENLARGE/REDUCE> for this function.
Note
When you copy more than one sheet of document, press the same [Start] button ([Black] or
[Color]) as the first operation after loading each sheet on the Platen Glass.
Note
z This function cannot be used in conjunction with other copy functions.
z If <MEMORY IS FULL> appears on the LCD when scanning, set the image quality to
<STANDARD> or <FAST> and try copying again.
z This function can be used only when page size is set to <8.5 x 11> (215 x 279) or <A4>.
4-ON-1 LAYOUT
PATTERN 1
X
SCAN NEXT [START]
START PRINT [OK]