Canon Pixma MP530 User Manual
Page 82
80
Chapter 4
Faxing
Receive Modes
Select the receive mode according to your needs.
z
If You Want to Receive Only Faxes Automatically with Your Machine, or
You Have a Dedicated Telephone Line for Fax Use Only:
z
Select <FAX ONLY MODE >.
z
If You Receive Mainly Voice Calls and Sometimes Faxes, or You Want to
Receive Faxes Manually:
z
Select <MANUAL MODE>.
Important
The machine cannot receive faxes when the power is turned OFF. Press [ON/OFF] to turn the
power ON.
Note
The machine can receive faxes in any mode, such as copy mode (when [COPY] is pressed),
fax mode (when [FAX] is pressed), or scan mode (when [SCAN] is pressed). However, when
the machine received faxes in other than fax mode, they will not be printed immediately after
received but printed after about three minutes automatically. If you want to print the received
faxes immediately, press [FAX].
z
When you receive a fax call:
The machine will receive the fax automatically.
z
When you receive a voice call: You will not be able to answer the call.
Note
The telephone does not ring when it receives a fax call. If you want it to ring, connect a
telephone to your machine and enable the <INCOMING RING> setting (see
). You can also select the number of rings before the machine answers
(See
z
When you receive a fax call:
The telephone will ring. Pick up the handset and if you
hear a high-pitched signal, press [Black] or [Color] on
the machine to receive the fax.
z
When you receive a voice call: The telephone will ring. Pick up the handset to answer
the call.
z
For remote receiving:
If you are far from your machine, dial 25 (the remote
receiving ID) on your telephone to receive faxes.