Playing back a tape – Canon Elura 100 User Manual
Page 38
38
Playback
Playing Back a Tape
1. Holding the lock button on the
switch pressed down, set
the switch to PLAY.
2. Set the TAPE/CARD switch to
.
3. If the joystick guide does not
appear on screen, press (
) to
display it.
4. Push the joystick (
) towards
to rewind the tape.
5. Push the joystick (
) towards
/
to play back the tape.
Push (
) again to pause the playback.
6. Push the joystick (
) towards
to stop the playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette (
120).