Canon Elura 100 - Manual (Page 86)

86
Editing Recording to a VCR or Digital Video
Device
You can copy your recordings by connecting the camcorder to a VCR or a digital video
device (DVD recorder, another digital camcorder, etc.). If you connect a digital video
device, you can copy recordings with virtually no generation loss in image and sound
quality.
Connecting the Devices
Connecting a VCR
See Playing Back on a TV Screen ( 42).
Connecting a DVD Recorder or other digital video device with a DV
Terminal
Refer also to the instruction manual of the digital video device.
Recording
Available only in the mode.
1. Load a recorded cassette.
2. Connected device: Load a blank cassette or disc and set the device to
record pause mode.
3. Locate the scene you wish to copy and pause playback shortly before
the scene.
4. Play back the tape.
5. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
6. Stop playback.
Signal flow
Digital video device
(e.g. camcorder)
Commercially available DV cable
INPUT
DV (IEEE1394)
terminal
Open the LCD panel