Canon Elura 100 - Manual (Page 94)

94
Audio Dubbing
You can add sound either from external audio devices (AUDIO IN) or with the built-in or
an external microphone (MIC. IN).
This function is operated with the wireless controller.
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Dubbing
Available only in the mode.
1. Load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Select ( ) the [AUDIO SETUP] menu and press ( ). Then, select
( ) the [AUDIO DUB.] option and press ( ).
3. Set it to [AUDIO IN] or [MIC.IN] and press ( ) to save the changes,
then close the menu.
4. Locate the scene you wish to start audio dubbing.
5. Press the PAUSE button on the wireless controller.
6. Press the AUDIO DUB. button on the wireless controller.
“AUDIO DUB.” and “ ” appear.
7. Press the PAUSE button on the wireless controller to begin
dubbing.
• Microphone: Speak into the microphone.
• Audio device: Begin playback.
8. Press the STOP button on the wireless controller to stop dubbing.
Audio device: Stop playback.
MENU
(
64)
AUDIO SETUP AUDIO DUB. AUDIO IN
AUDIO
R R
L
Signal flow
STV-250N Stereo Video Cable
(supplied)
Audio device
(e.g. CD player)
OUTPUT
Open the terminal cover