Canon Elura 100 - Manual (Page 80)

80
Selecting the Drive Mode
Changing the Drive Mode
Available only in the mode.
1. Set the mode switch to .
2. Open the FUNC. menu and select ( ) the drive mode icon.
3. Select ( ) a setting option and close the menu.
Continuous Shooting/High-Speed Continuous Shooting
1. Press the PHOTO button halfway.
2. Press and hold the PHOTO button fully.
A series of still images will be recorded as long as you hold the PHOTO button.
 Maximum number of continuous shots at one time:
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
 The number of frames per second will be lower when “ ” (camcorder shake
warning) is displayed on the screen.
Single Records a single still image when you press the
PHOTO button.
Continuous Shooting Captures a quick series of still images while you press
the PHOTO button. For the number of frames per
second, refer to the table on the next page.
High-Speed Continuous
Shooting
AEB
(Auto Exposure Bracketing) The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps),
allowing you to choose the shot you like the best.
Self-timer Records a still image after a self-timer delay ( 52).
Still Image Size
Frames per Second Maximum Number of
Continuous Shots Normal speed High speed
L 1152 x 864 3.0 frames 5.0 frames 10 images
S 640 x 480 3.0 frames 5.0 frames 60 images
PHOTO button
Mode switch
FUNC. button
Joystick