Canon ELURA 85 - Manual (Page 101)

101
Usin
g
a Memo
ry
Ca
rd
E
Screen Displays during Movie Recording
Recording from a Tape in the Camcorder
1. Play back the tape.
2. Press the start/stop button when the scene you wish to record
appears.
3. Press the start/stop button to stop recording.
Recording from Other Video Devices
You can record movies from devices connected via the AV terminal (analog line-in
function), or via the DV terminal on a memory card. For connecting instructions, refer to
page 36 and 79.
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure the tape is stopped.
• When recording via the AV terminal, make sure that “AV
DV” is displayed on the
screen. When recording via the DV terminal, make sure that “AV DV” is not
displayed. Change the setting as necessary ( 84).
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the start/stop button when the scene you wish to record
appears.
4. Press the start/stop button to stop recording.
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
Card Access Display
“ ” appears and “ ” moves to
indicate that the camcorder is writing on
the memory card.
Movie recording time
Indicates the recording time of the
movie.
Image Size
Indicates the movie size.
Remaining Card Capacity for
Movies
Indicates the remaining time in hours
and minutes. At less than 1 minute, the
remaining time will be displayed in 10
second-steps, at less than 10 seconds
in 1 second-steps.
• The indication varies depending on
the recording condition. The actual
remaining time may be longer or
shorter than indicated.