Canon ELURA 85 - Manual (Page 95)

95
Usin
g
a Memo
ry
Ca
rd
E
Recording a Still Image on a Memory Card While
Recording Movies on a Tape
When you are recording a movie on a tape, you can record the same picture as a still
image on the memory card. Select the image quality from normal or fine.
1. Open the menu and select [CAMERA SETUP]. Select [STILL I.REC], set
it to [ FINE] or [ NORMAL] and close the menu.
2. While you are recording a movie, press the PHOTO button.
 The size of the still image will be 640 x 480.
 The quality of the still image is slightly lower than a still image recorded in
CARD CAMERA mode.
 The still image cannot be recorded on a memory card when a fader, effect or
the multi-image screen is activated.
 The still image cannot be recorded on a memory card when the widescreen
mode is selected.
 “ ” appears when you press the PHOTO button when [STILL I.REC] is
set to [OFF].
Recording from a Tape in the Camcorder
1. Play back the tape.
2. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other
information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The card access indicator flashes.
• You can also record a still image by pressing the PHOTO button fully when the tape
is in playback pause mode.
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
MENU
( 38)
CAMERA SETUP STILL I.REC••OFF
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY