Canon ELURA 85 - Manual (Page 79)

79
E
d
it
in
g
E
Editing
Recording to a VCR or Digital Video
Device
You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. If you connect a digital video device, you can copy recordings with virtually no
generation loss in image and sound quality.
Connecting the Devices
Connecting a VCR
See Playing Back on a TV Screen ( 36).
Connecting a Digital Video Device
Refer also to the instruction manual of the digital video device.
Recording
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
If you are connecting via AV terminal, check the setting ( 36).
2. Connected device: Load a blank cassette and set the device to record
pause mode.
3. Locate the scene you wish to copy and pause playback shortly before
the scene.
4. Play back the tape.
5. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
6. Stop playback.
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
Signal flow
Commercially available DV cable