Canon ELURA 85 - Manual (Page 86)

86
5. Press the AUDIO DUB. button on the wireless
controller.
“AUDIO DUB.” and “ ” appear.
6. Press the PAUSE button on the wireless controller
to begin dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP button on the wireless controller
to stop dubbing.
Audio device: Stop playback.
 Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or 16-bit mode.
 When using the built-in microphone, do not connect any
devices to the MIC terminal.
 You cannot use the DV terminal for audio dubbing.
 If you add sound to a tape not recorded with this camcorder, sound quality may
decrease.
 Sound quality may decrease when you add sound to the same scene for more
than 3 times.
 You can check the picture on the LCD screen.
 When you connect an audio device, check the sound via built-in speaker or
audio device.
 When you use a microphone, you can check the picture on a TV connected via
the AV terminal and the sound via headphones connected to the TV.
 Set the zero set memory at the end of the scene you wish to dub audio. The
camcorder will automatically stop audio dubbing at that point.
PAUSE SLOW
AUDIO DUB.
ZERO SET
MEMORY TV SCREEN
PLAY
STOP
PAUSE SLOW
AUDIO DUB.
ZERO SET
MEMORY TV SCREEN
PLAY
STOP
PAUSE SLOW
AUDIO DUB.
ZERO SET
MEMORY TV SCREEN