Canon REALiS X600 - Manual (Page 110)

User Command Specifications 9．Details of command GET AVOL
1 GET AVOL
GET AVOL
GET□AVOL
?△AVOL
g:AVOL=<Volume setting: Number>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The audio volume can be set by the AVOL command.
> GET AVOL or ? AVOL
< g:AVOL=18
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
Function
Format
Description
Response
Control Setting
Audio volume setting inquiry
This inquires about the current audio volume setting.
Number
Mode Reference
SX50 SX6 SX60 X600
01.00** 01.01** 01.01**
○ ○ ○ ○
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Example
01.01**
PAGE 102