Canon REALiS X600 - Manual (Page 131)

User Command Specifications 9．Details of command GET PRODCODE
1 GET PRODCODE
GET PRODCODE
GET□PRODCODE
?△PRODCODE
g:PRODCODE="<Product name: Character string>"
For all other responses, refer to "Error List."
-1 This inquiry can be executed in any status provided that AC power is supplied to the projector.
> GET PRODCODE or ? PRODCODE
< g:PRODCODE="SX50"
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
○ ○ ○
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
– ○
X600
SX60
○ ○ ○ ○ ○ ○ ○ ○ SX6 ○ ○ ○
○ × ○ ○ ○ – SX50 ○ ○ ○
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp S-Video Remote
Remarks
Local Video
○
D-Video SCART None
Mode
Commands
supported 01.00**
Example
○
SX50
01.01**
Control Setting
Response
This inquires about the product name of the projector.
Character
string
Description
SX50
SX6
SX60
X600
For the "SX50," the projector must be in the remote mode and power-on status.
Commands
Function
Format
Product information inquiry
Mode Reference
○ ○
X600 SX60
01.01** 01.01**
SX6
Product name
PAGE 123