Canon REALiS X600 - Manual (Page 139)

User Command Specifications 9．Details of command RANGE INPUT
1 RANGE INPUT
RANGE INPUT
RANGE□INPUT
r:INPUT=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other responses, refer to "Error List."
-1 This inquiry can be made in the power-on status.
A "busy" response is given while the zoom or focus lens is being driven.
With the SX50, the inquiry can be made in the remote mode only.
-2 The input selection can be controlled by the INPUT command.
> RANGE INPUT
< r:INPUT=I, D-RGB, A-RGB1, A-RGB2, COMP, VIDEO, S-VIDEO
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
01.01**
Commands
Function
Commands
supported 01.00** 01.01** 01.01**
Format
Example
Description
X600
SX60
○ ○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ × SX50 ○ ○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
○ ○ ○ ○
Response
Input selection setting option request
Mode Control Setting Reference
ID
○ ○ ○ －
This inquires about the parameter options which enable input selection to be set.
(Refer to the ZCONTDRV command and FCONTDRV command.)
SX60 X600 SX50 SX6
PAGE 131