Canon REALiS X600 - Manual (Page 8)

User Command Specifications 2. Communication Specifications
Request transmissions sent from PC to the projector
△ <Command character strings> △<Delimiters>
One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h)
Null
□ BUSY
■ WARN
■ ERR
□ GET
□ RANGE
Control Projector control command. The format is shown below. ■ OK
■ BUSY
■ WARN
■ ERR
□ GET
□ RANGE
Setting Command that sets values for each parameter. The format is shown below. ■ OK
■ BUSY
■ WARN
■ ERR
□ GET
□ RANGE
Reference Requests current value of each parameter. The format is shown below. □ OK
■ BUSY
■ WARN
■ ERR
■ GET
□ RANGE
□ OK
■ BUSY
■ WARN
■ ERR
□ GET
■ RANGE
Requests range which can be set for each parameter. The format is shown
below.
Null Commands
Character string
<Setting command character strings>:= <Parameter
name>△=△<Parameter value>
Control command
Character string
Transmission
format
Type Response Description
Commands
Commands with a command character string length of 0. No command
processing is performed.
<Command character
strings>
■
Type
OK
Setting command
Character string
For the definition of <Parameter value>, refer to "Parameter definitions."
<Reference command character string>:=? △<Parameter name> |
GET□<Parameter name>
Reference
command
Character string
<Delimiters>
Command List Reference
Character strings consisting of 0 or more alphanumeric
characters
<Null command character string>:= <Character string with length
0>
<Control command character string>:= <Control
name>□<Parameter value>
<Range request command character string>:=
RANGE□<Parameter name>
PAGE 3