Canon REALiS X600 - Manual (Page 130)

User Command Specifications 9．Details of command GET ERR
1 GET ERR
GET ERR
GET□ERR
?△ERR
g:ERR=<ErrorＩＤ:ＩＤ>
NO_ERROR No error
ABNORMAL_TEMPERATUR Temperature error
FAULTY_LAMP Lamp error
FAULTY_LAMP_COVER Lamp cover error
FAULTY_COOLING_FAN Cooling fan error
FAULTY_POWER_SUPPLY Power supply error
FAULTY_AK AK error
FAULTY_ASC ASC error
FAULTY_AF AF error
FAULTY_POWER_ZOOM Zoom error
FAULTY_POWER_FOCUS Focus error
For all other responses, refer to "Error List."
-1 This inquiry can be executed in any status provided that AC power is supplied to the projector.
-2
"NO_ERROR" is returned when the warning LED is not lighted.
> GET ERR or ? ERR
< g:ERR=FAULTY_LAMP
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
○ ○ ○
○ ○ ○
* If a command cannot be supported, 'INVALID_MODE' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
Information when the warning LED of the projector is flashing can be obtained.
○
SX50 SX6 SX60
01.00** 01.01** 01.01**
○ ○
Commands
Function
Format
Error information inquiry
Mode Control Setting
Description
Response
This inquires about the current error information.
ID
Error ID
Reference
○
01.01**
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video
Mode
Remote Local
Remarks
S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
SX60
X600
○ ○
○
Commands
supported
Example
For the "SX50," the remote mode must be established.
○ ○
○ ○
○
○ ○
Errors supported by model
SX50 SX6 SX60 X600
○ ○
○
○ ○ ○
○
○ ○
○
– ○ ○ ○
○
– ○ ○ ○
–
○
– ○ ○ ○
Meaning
– ○ ○
○ ○
○ ○
○ ○
PAGE 122