Canon REALiS X600 - Manual (Page 114)

User Command Specifications 9. Details of command GET PMM
1 GET PMM
GET PMM
GET□PMM
?△PMM
g:PMM=<Setting：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command）
-2 Power management can be set by the PMM command.
> GET PMM or ? PMM
< g:PMM=EXIT
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Off
STANDBY Standby mode
Commands
Function
Format
Meaning
OFF
Description
Response
Control Setting
Power management setting inquiry
This inquires about the current power management setting.
ID
EXIT Exit mode
Setting
Mode
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○ ○ ○ ○
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video
Mode
Remote Local
Remarks
D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Example
PAGE 106