Canon REALiS X600 - Manual (Page 82)

User Command Specifications ９．Details of command GET POWER
1 GET POWER
GET POWER
GET□POWER
?△POWER
g:POWER=<Power status: ID>
OFF
OFF2ON
ON
ON2PMM
Transitioning from power on→standby mode
PMM
PMM2ON
Transitioning from standby→power on
ON2OFF
For all other responses, refer to "Error List."
-1 This inquiry can be executed in any status provided that AC power is supplied to the projector.
-2 Use the following commands to control the power status with the user commands.
> GET POWER or ?POWER
< g:POWER=ON
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
○ ○ ○
○ ○ ○
* If a command cannot be supported, 'INVALID_MODE' is returned as an error response.
ID
Mode
This inquires about the current projector power status.
Power supply state
Standby
Transitioning from power on→off
Status
Power Off
Transitioning from power off→on
Power on
Local
For the "SX50," the remote mode must be established.
Remote
Commands
POWER ON/OFF
RC POWER/POWER_OFF
MAIN POWER/POWER_OFF
Setting Reference Mode Control
SX60 X600
○ ○ ○ –
SX50 SX6
Commands
Function
Format
Description
Response
Power status inquiry
○ ○ ○
01.00** 01.01** 01.01** 01.01**
Model Power Input Mode
Remote Local
Commands
supported
○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
× SX50 ○ ○ ○
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○
X600
Example
SX60
○ ○
– ○ ○
PAGE 74