Canon REALiS X600 - Manual (Page 153)

User Command Specifications 9．Details of command RANGE WB
1 RANGE WB
RANGE WB
RANGE□WB
r:WB=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE WB
< r:WB=I, NORMAL, GREENBOARD, ADJUST
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
supported
Setting Reference
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
○ ○ ○ ○
01.01**
SX50 SX6
01.01**
Commands
Function
Format
Example
Description
Response
01.01**
Screen color correction option request
This inquires about the parameter options which enable the screen color to be corrected.
ID
(Refer to the ZCONTDRV command and FCONTDRV command.)
The screen color correction can be set by the WB command.
01.00**
Mode Control
SX60 X600
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Mode
Remote Local
Remarks
SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
○ SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
PAGE 145