Canon REALiS X600 - Manual (Page 135)

User Command Specifications 9. Details of command RANGE
<Parameter name>=<Type>, <Setting range>
1. When the type is I (ID)
<Setting range>: = <Setting option 1>, <Setting option 2>, <Setting option 3>,
<Setting option 4>, …, <Setting option N>
2. When the type is N (Number)
-1
-2
-3 For further details, refer to the descriptions of the commands.
To ensure reliability, request the setting ranges before sending the setting or control
commands.
(Once the setting ranges have been obtained, the setting or control commands can be
The setting ranges of the setting or control command parameters may differ depending on the
projector status (input, display mode, etc.).
The definition of <Setting range> varies depending on the type.
<Setting range>: = <Setting option 1 minimum value>, <Setting option 1 maximum
value>, <Setting option 2 minimum value>, <Setting option 2 maximum value>, …,
<Setting option N minimum value>, <Setting option N maximum value>
Response
Description
Type Meaning
I ID
N Number
Responses are made in the formats below for each parameter.
This retrieves the setting range of each parameter.
PAGE 127