Cabletron Systems HSIM-W6 - Manual (Page 102)

Chapter 6: HSIM-W6 Configuration with QuickSET
88 HSIM-W6 User’s Guide
Bridging and Routing Configuration
Once the initial configuration of the WAN is complete and all the necessary network information is
collected, you can configure your device for bridging and/or routing. This section explains how to
configure the HSIM-W6 for bridging and routing using QuickSET.
Bridging and Routing Configuration Window
The first Bridging and Routing configuration window shown in Figure 31 displays after clicking
on the Next>> button at the bottom of the Wide Area (Frame Relay, PPP, or HDSL) Time Slot
configuration window or the Wide Area (Sync or DDS) configuration window.
Figure 31 Bridging and Routing Configuration Window