Cabletron Systems HSIM-W6 - Manual (Page 21)

Chapter 2: About the HSIM-W6
HSIM-W6 User’s Guide 7
• The WPIM-T1/DDS provides both a T1 and DDS interface that allows you to easily switch
between the two interfaces by changing the physical cabling and reconfiguring QuickSET for
the desired interface. The WPIM-T1/DDS has the capabilities of both the WPIM-T1 and
WPIM-DDS.
Additional Features
FLASH EEPROMs — The HSIM-W6 uses FLASH Electrically Erasable Programmable
Read-Only Memory (EEPROM) that allows the downloading of new and updated firmware in
conjunction with Cabletron Systems QuickSET or any device using BootP or TFTP protocols.
LANVIEW LEDs — Cabletron Systems LANVIEW Status Monitoring and Diagnostics System is
a troubleshooting tool that helps in the diagnosing of power failures, collisions, cable faults, and
link problems. The LANVIEW LEDs are located on the HSIM-W6 front panel.
Remote Management Capabilities
The HSIM-W6 can be remotely managed with any SNMP network management system including
the following:
• Cabletron Systems SPECTRUM
• Cabletron Systems Remote SPECTRUM Portable Management Applications (SPMAs)
• Third party SNMP compliant network management packages
• Cabletron Systems QuickSET
• Cabletron Systems SPECTRUM Element Manager (SPEL)