Cabletron Systems HSIM-W6 - Manual (Page 139)

Chapter 7: General Configuration Using Local Management
HSIM-W6 User’s Guide 125
• Bridge Setup – The Bridge Setup screen allows you to select a Spanning Tree protocol and
enable/disable switch ports.
• Router Setup – The Router Setup screen accesses two other screens that provide general IP or
IPX routing configuration and allow you to enable or disable the Routing Information Protocol
(RIP) and the Service Advertising Protocol (SAP) features.
• WAN Setup – The WAN Setup menu item accesses two other screens that provide WAN
physical configuration and WAN Interface configuration access to enable a WAN link to be set
up.
NOTE
If you have a WPIM-HDSL installed in your HSIM-W6, refer to the WAN Setup section of
this chapter for configuration information. For all other WPIMs, refer to your specific
WPIM(s) Local Management Guide for information on configuring the HSIM-W6 for a
Wide Area Network Interface
.