Cabletron Systems HSIM-W6 - Manual (Page 70)

Chapter 5: Installation
56 HSIM-W6 User’s Guide
13. Reattach the network cabling to the module.
.
Figure 15 Installing the HSIM
Installing an HSIM in a SmartSWITCH Chassis
To install an HSIM into a SmartSWITCH chassis that supports HSIM technology refer to
Figure 14 and Figure 15 , and perform the following steps:
1. Power down the chassis and remove the power cord.
Standoff Screws
Faceplate Mounting Screws
225705
HSIM Connector
Standoffs
WIDE AREA
1
WIDE AREA
2
ASYNC
TELCO
TELCO
LNK
STS
LNK
STS
LNK
STS