Cabletron Systems HSIM-W6 - Manual (Page 94)

Chapter 6: HSIM-W6 Configuration with QuickSET
80 HSIM-W6 User’s Guide
Wide Area HDSL Configuration Window
The Wide Area HDSL configuration window shown in Figure 27 displays after clicking on the
Next>> button in either the HSIM configuration window or the Wide Area (Frame Relay-HDSL or
PPP-HDSL) configuration window, depending on whether you have installed one or two WPIMs
in the HSIM-W6, and the order that you are configuring them.
This section explains how to configure the HSIM-W6 Wide Area HDSL port using QuickSET.
Figure 27 Wide Area HDSL Configuration Window
NOTE
The wiring provider (i.e., Internet Service Provider (ISP) contractor, etc.) determines
the settings for
Table 18 . Consult the service provider for the correct settings.