Dell PowerEdge 2450 - Manual (Page 100)

9-8 Dell PowerEdge 2450 Systems Installation and Troubleshooting Guide
3. Open the computer covers.
4. Install the controller card in an expansion slot.
See “Installing an Expansion Card” in Chapter 8 for information on installing the
card.
5. Close the computer covers.
6. Connect the tape drive's interface/DC power cable to the external connector on
the controller card; secure the connection by tightening the screws on the
connector.
7. Reconnect the computer and peripherals to their power sources, and turn them
on.
8. Perform a tape backup and verification test with the drive as instructed in the
software documentation that came with the drive.