Dell PowerEdge 2450 - Manual (Page 29)

support.dell.com Messages and Codes 3-13
4-2-4 Unexpected interrupt in pro-
tected mode Ensure that all expansion cards are
properly seated, and then reboot
the system.
4-3-1 Improperly seated or faulty
DIMMs Remove and reseat the DIMMs. If
the problem persists, replace the
DIMMs. See Chapter 11, “Getting
Help,” for instructions on obtaining
technical assistance.
4-3-3 Defective system board Replace the system board. See
Chapter 11, “Getting Help,” for
instructions on obtaining technical
assistance.
4-3-4 Time-of-day clock stopped Replace the battery. If the problem
persists, replace the system board.
See Chapter 11, “Getting Help,” for
instructions on obtaining technical
assistance.
4-4-1 Super I/O chip failure (defective
system board) Replace the system board. See
Chapter 11, “Getting Help,” for
instructions on obtaining technical
assistance.
4-4-2 Parallel-port test failure (defec-
tive system board) Replace the system board. See
Chapter 11, “Getting Help,” for
instructions on obtaining technical
assistance.
4-4-3 Math coprocessor failure (defec-
tive microprocessor) Remove and reseat the specified
microprocessor. If the problem still
persists, replace the micro-
processor. Chapter 11, “Getting
Help,” for instructions on obtaining
technical assistance.
4-4-4 Cache test failure (defective
microprocessor) Remove and reseat the specified
microprocessor. If the problem still
persists, replace the micro-
processor. See Chapter 11, “Getting
Help,” for instructions on obtaining
technical assistance.






   


NOTE: For the full name of an abbreviation or acronym used in this table, see “Abbreviations and
Acronyms."