Dell PowerEdge 2450 User Manual

Page 139

Advertising
background image

vii



If any of the following conditions occur, unplug the product from the electrical
outlet and replace the part or contact your Dell authorized service provider:

The power cable, extension cord, or plug is damaged.

An object has fallen into the product.

The product has been exposed to water.

The product has been dropped or damaged.

The product does not operate correctly when you follow the operating
instructions.



Keep your system components away from radiators and heat sources. Also, do
not block cooling vents.



Do not spill food or liquids on your system components, and never operate the
product in a wet environment. If the computer gets wet, see the appropriate sec-
tion in your troubleshooting guide or contact a Dell-authorized service provider.



Do not push any objects into the openings of your system components. Doing so
can cause fire or electric shock by shorting out interior components.



Use the product only with Dell products or other Dell-approved equipment.



Allow the product to cool before removing covers or touching internal
components.



Use the correct external power source. Operate the product only from the type
of power source indicated on the electrical ratings label. If you are not sure of the
type of power source required, consult your Dell service provider or local power
company.



To help avoid damaging your system components, be sure the voltage selection
switch (if provided) on the power supply is set to match the power available at
your location:

115 volts (V)/60 hertz (Hz) in most of North and South America and some Far
Eastern countries such as South Korea and Taiwan

100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan

230 V/50 Hz in most of Europe, the Middle East, and the Far East

Also be sure that your monitor and attached peripherals are electrically rated to
operate with the power available in your location.



Use only approved power cable(s). If you have not been provided with a power
cable for your computer or storage system or for any AC-powered option
intended for your system, purchase a power cable that is approved for use in your
country. The power cable must be rated for the product and for the voltage and
current marked on the product’s electrical ratings label. The voltage and current
rating of the cable should be greater than the ratings marked on the product.



To help prevent electric shock, plug the system components and peripheral
power cables into properly grounded electrical outlets. These cables are
equipped with three-prong plugs to help ensure proper grounding. Do not use

Advertising