Dell PowerEdge 2450 - Manual (Page 41)

support.dell.com Running the Dell Diagnostics 5-5

The Select option in the Device Groups menu allows you to choose one or more
devices from a particular device group. Three options are displayed: One, All, and
Help.
 
Choosing Config from the Device Groups menu displays information about the par-
ticular device that is highlighted.
 
When you run a test in the diagnostics, error messages may result. Record the mes-
sages on a copy of the Diagnostics Checklist; also see Chapter 11, “Getting Help,” for
instructions on obtaining technical assistance and informing the technical assistance
representative of these messages.





 



Number of Times to Repeat
Test(s) 0001 through 9999 or 0000, which loops indefi-
nitely until you press <Ctrl><Break>. The default
is 1.
Maximum Errors Allowed 0000 through 9999, where 0000 means that
there is no error limit. The default is 1.
Pause for User Response Yes, No
Allows you to decide whether tests will wait for
user input.
The default is Yes to wait for user input.
Message Logging None, Errors, All
Determines if any test results are saved to a file.
The default is None.
Message Logging File Name Specifies the name of the logging file if the Mes-
sage Logging option is selected. The default is A:
RESULT.