Memory problems, Network problems – Dell Vostro 1700 (Early 2009) User Manual
Page 128
128
Troubleshooting
(your program may require an upgrade) to scan the computer and remove
spyware. For more information, go to support.dell.com and search for the
keyword spyware.
R
UN
THE
D
ELL
D
IAGNOSTICS
—
If all tests run successfully, the error condition
is related to a software problem (see "Dell Diagnostics" on page 105).
Memory Problems
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
I
F
YOU
RECEIVE
AN
INSUFFICIENT
MEMORY
MESSAGE
—
•
Save and close any open files and exit any open programs you are not using
to see if that resolves the problem.
•
See the software documentation for minimum memory requirements. If
necessary, install additional memory (see "Memory" on page 163).
•
Reseat the memory modules to ensure that your computer is successfully
communicating with the memory (see "Memory" on page 163).
•
Run the Dell Diagnostics (see "Dell Diagnostics" on page 105).
I
F
YOU
EXPERIENCE
OTHER
MEMORY
PROBLEMS
—
•
Reseat the memory modules to ensure that your computer is successfully
communicating with the memory (see "Memory" on page 163).
•
Ensure that you are following the memory installation guidelines (see
"Memory" on page 163).
•
Ensure that the memory you are using is supported by your computer. For
more information about the type of memory supported by your computer,
see "Memory" on page 163.
•
Run the Dell Diagnostics (see "Dell Diagnostics" on page 105).
Network Problems
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
C
HECK
THE
NETWORK
CABLE
CONNECTOR
—
Ensure that the network cable is
firmly inserted into both the network connector on the back of the computer
and the network jack.