Dell Vostro 1700 (Early 2009) - Manual (Page 182)

182
Adding and Replacing Parts
Coin-Cell Battery
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
Removing the Coin-Cell Battery
1 Follow the procedures in "Before You Begin" on page 153.
2 Turn the computer over.
3 Loosen the captive screw on the memory module/coin-cell battery cover
(see "Bottom View" on page 33), and remove the cover.
1 securing tabs (2) 2 cable
3 card
1
3
2