Replacing the dimm a memory module – Dell Vostro 1700 (Early 2009) User Manual
Page 165
Advertising
Adding and Replacing Parts
165
Replacing the DIMM A Memory Module
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1 Align the notch in the module edge connector with the tab in the
connector slot.
2 Slide the memory module firmly into the slot at a 45-degree angle, and
rotate the module down until it clicks into place. If you do not feel the
click, remove the module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer may not boot.
No error message indicates this failure.
1
memory module (DIMM A)
2
memory-module securing clips (2)
1
2
Advertising