Removing a wpan card – Dell Vostro 1700 (Early 2009) User Manual

Page 178

Advertising
background image

178

Adding and Replacing Parts

3 Connect the black antenna cable with a gray stripe to the connector

labeled "aux" (black triangle) and connect the white antenna cable with a
gray stripe to the connector labeled "main" (white triangle).

4 Secure unused antenna cables in the protective mylar sleeve.
5 Replace the cover and tighten the captive screws.

Removing a WPAN Card

1 Follow the procedures in "Before You Begin" on page 153.
2 Turn the computer over.
3 Loosen the captive screws on the Mini-Card cover and remove the cover.

4 Disconnect the blue antenna cable from the

WPAN

card.

5 Release the

WPAN

card by pushing the metal securing tabs toward the

back of the computer until the card pops up slightly.

6 Lift the

WPAN card

out of its system board connector.

1

captive screws (2)

2

Mini-Card cover

1

2

Advertising